Unsuccessful Programming Recovery

In the event of an interrupted or unsuccessful programming event, perform the following steps:

1. Verify the K9 Body Control Module, X84 Data Link Connector, and programming tool connections are secure and the SPS software is up to date.
2. Ignition/Vehicle OFF.
3. Access SPS and follow the on-screen instructions for the K9 Body Control Module.
4. Verify the K9 Body Control Module can be reprogrammed.
   • If the K9 Body Control Module cannot be reprogrammed 
   1. Ignition/Vehicle OFF for greater than 1 min.
   2. Access SPS and follow the on-screen instructions for the K9 Body Control Module.
   3. Verify the K9 Body Control Module can be reprogrammed.
      • If the K9 Body Control Module cannot be reprogrammed, replace the K9 Body Control Module.
      • Go to next step: If the K9 Body Control Module can be reprogrammed.
   4. All OK.
   • Go to next step: If the K9 Body Control Module can be reprogrammed 
5. All OK.