Side Obstacle Detection Control Module Replacement

Courtesy of GENERAL MOTORS COMPANY

NOTE: Callouts in the following chart represent components shown in graphic above.

Callout	Component Name
Preliminary Procedure Rear Bumper Fascia Replacement
1	Side Object Sensing Alert Module Bolt [2x] CAUTION: Refer to Fastener Caution . Tighten 2.5N.m (22 lb in)
2	Side Object Sensing Alert Module [2x] Procedure Disconnect the electrical connector. Slide the module out of the retaining bracket. Perform the necessary programming and setup procedure:Control Module References

Callout

Component Name

Side Object Sensing Alert Module Bolt [2x]

CAUTION:

Tighten
2.5N.m (22 lb in)

Side Object Sensing Alert Module [2x]

Procedure