Engine Data Display Procedure
- Depressing the "OFF" button on CCP will stop test selection process and return display to next available test type for selected system.
- Depressing the "LO" button on CCP will display next smaller test number for selected test type. If this button is pressed with lowest test number displayed, the highest test number will then appear.
- Depressing the "HI" button on CCP will display next larger test number for the selected test type. If this button is pressed with highest test number displayed, the lowest test number will appear.
ENGINE DATA PARAMETERS
| Display |
Parameter |
Range |
| ED01 |
TPS |
-10-90° |
| ED02 |
MAP |
14-109 kPa |
| ED03 |
BARO |
61-103 kPa |
| ED04 |
Coolant Temp. |
-40-151°C |
| ED05 |
MAT |
-40-151°C |
| ED06 |
Injector Pulse |
0-99.9 ms |
| ED07 |
Oxygen Sensor |
0-1.14 volts |
| ED08 |
Spark Advance |
-30-60° |
| ED10 |
Battery Volts |
0-25.5 volts |
| ED11 |
Engine RPM |
0-6370 |
| ED12 |
Vehicle Speed |
0-25 MPH |
| ED18 |
02 Cross Counts |
0-255 |
| ED19 |
Fuel Integrator |
0-255 |
| ED26 |
VCC Volts |
0-5.1 volts |
| ED98 |
Ignition Cycles |
0-50 |
| ED99 |
ECM PROM I.D. |
0-999 |