Code B420 - Courtesy Light Relay Circuit: Notes

If courtesy lights did not cycle on and off when BO04 was selected, then courtesy lights relay set code B420.

1. Checks if fault is caused by an open circuit or a short to ground. If courtesy lights are always on, then there is a short to ground in control circuit. If courtesy lights are never on, then there is an open in one of the circuits.
2. Checks if short to ground is due to circuit or BCM.
3. Checks if open circuit is due to circuit or BCM.
4. Checks if open circuit is on power side of relay.
5. Checks is open circuit is on ground side of relay or if relay is at fault.