Pcm Code E032, Open Map Sensor Circuit: Action

PCM turns on SERVICE ENGINE SOON light. PCM uses a substitute MAP value based on engine RPM and throttle switch status (open or closed).

NOTE: Test numbers refer to numbers on diagnostic chart.

This checks PCM ability to respond to a 5-volt signal on MAP input. A reading of 106-109 kPa means wiring and PCM are okay.
This checks for 5-volt reference signal at sensor connector.
This checks circuit No. 432 for short to ground.
This checks PCM's ability to respond to a 5-volt signal voltage on MAP input.
Fault is most likely at PCM connector. If PCM connector is okay, replace PCM.