Pcm Code E042, Left Oxygen (O2) Sensor Lean Signal: Description

PCM provides a .45-volt reference signal to O2 sensor on circuit No. 1589. When O2 sensor temperature is less than 392°F (200°C), O2 sensor signal voltage will be about .45 volt and PCM will keep system in "open loop" operation. When O2 sensor temperature is greater than 392°F (200°C), O2 sensor will begin to generate a signal voltage. In a rich environment, signal voltage will be greater than .45 volt. In a lean environment, signal voltage will be less than .45 volt. If PCM is in good control of air/fuel mixture, mixture will change from rich to lean rapidly (at least one change every 2 seconds).

When PCM sees O2 sensor is generating a signal voltage (greater than .45 volt), it will send system into "closed loop" operation. In "closed loop" operation, PCM will adjust fuel delivery rate to engine based on O2 sensor readings.

PCM Code E042 sets if O2 sensor stays at lean voltage more than 50 seconds during test conditions. PCM Code E042 sets when an O2 sensor circuit fault giving a false lean indication exists or when air/fuel ratio is actually lean due to a vacuum leak or fuel control system fault.