Removal & Installation

WARNING: This page is about the Seville STS, which is a different variant/trim than selected.

TRANS ID - 4T80E

Applies To	Note	Standard Hours	Skill Level
	DOES NOT include wheel alignment - check.	9.0	C
Combination Procedure: CONVERTER: Drain & Test:
		0.2	C
Combination Procedure: CONVERTER BUSHING & SEAL: Remove & Replace:
		0.3	B
Combination Procedure: FLYWHEEL: Remove & Replace:
		0.2	C
Combination Procedure: INPUT SPEED SENSOR: Remove & Replace:
		1.2	B
Combination Procedure: TORQUE CONVERTER: Remove & Replace:
		0.1	C
Combination Procedure: TRANSAXLE ASSEMBLY: Replace:
		1.0	C

Applies To	Standard Hours	Skill Level
	8.3	C
Combination Procedure: CONVERTER: Drain & Test:
	0.2	C
Combination Procedure: CONVERTER BUSHING & SEAL: Remove & Replace:
	0.3	B
Combination Procedure: CONVERTER SEAL: Remove & Replace:
	0.3	B
Combination Procedure: FLYWHEEL: Remove & Replace:
	0.2	C
Combination Procedure: TORQUE CONVERTER: Remove & Replace:
	0.1	C
Combination Procedure: TRANSAXLE ASSEMBLY: Replace:
	1.0	C