Body Control Module (BCM): Installation

WARNING: This page is about a different car, the 1996 Cadillac Eldorado. However, it is still accessible from the selected car via links, so may be relevant.

Install BCM and reconnect harness connectors. Install rear seat back and cushion. Install 10-amp COMFORT fuse in trunk compartment fuse block. Reconnect negative battery cable.
Reprogram PZM override PZ S33 according to following values.
- E = Eldorado = 6
- K = Seville = 4
- Ksp = DeVille/Concours = 5
Press and hold DEFROST and AUTO buttons on CCP until display flashes. Cycle ignition. Clear DTCs.

Fig 1: Locating BCM (Concours, DeVille, Eldorado, Seville)

Courtesy of GENERAL MOTORS CORP.