DTC U1153, Loss Of Serial Communications - CCP: Testing
- If multiple class 2 codes are set as current (i.e., U1300, U1301, U1088 or U1153), check for an intermittent short to ground or battery in Purple wire between individual control modules.
- If DTC is current, attempt to establish communications with CCP using scan tool. If communication cannot be established, diagnose and repair problem in A/C system. See A/C SYSTEM GENERAL SERVICING article in AIR CONDITIONING & HEAT section. If communication can be established, replace PZM.
- If DTC is history, check for intermittent open in Purple wire between CCP and individual control modules.