DTC B2473: High Beam Fault: Notes

When BCM receives an input to turn high beam lights on, BCM grounds both headlight (high beam) relays. DTC B2473 will set when BCM detects a short to ground or open in White wire between BCM and headlight (high beam) relay. A short to ground in White wire may cause high beam indicator and right high beam headlight to illuminate. When DTC B2473 is set, BCM will continue to command state requested until it is achieved or changes. DTC B2473 will clear when conditions for fault no longer exist or when scan tool is used. A history DTC will clear after 50 consecutive ignition cycles if conditions for fault no longer exist.