Body Control Module: Description

WARNING: Deactivate air bag system before performing any service operation. See AIR BAG RESTRAINT SYSTEM article. DO NOT apply electrical power to any component on steering column without first deactivating air bag system. Air bag may deploy.

The system is equipped with 3 body control modules, the Dash Integration Module (DIM), Instrument Panel Integration Module (IPM), and the Rear Integration Module (RIM). Each module is connected to a Class-II serial data line. Many control signals are implemented by the serial data line.

The DIM functions include, power mode control (ignition switch state), control of headlights, front foglights, exterior lights, interior lights dimming, steering wheel controls, theft deterrent horn relay, HVAC compressor low side temperature, and hood ajar switch input (export models).

The IPM functions include, front HVAC air delivery and temperature controls, ambient light sensor input, headlight twilight delay input, foglight switch input, instrument panel dimmer switch input, traction control switch input, interior lights switch input, key in ignition input, fuel door and trunk lid release switch input, and ignition switch headlight control.

The RIM functions include, fuel level sensor input, heated seat controls, HVAC blower control, rear defogger control, parking brake relay controls, interior lights control, back-up light and automatic day/night mirror, rear foglights, fuel door/trunk lid release controls, RAP control for sun roof module, door ajar switch and tamper switch inputs from trunk lid, and anti-theft alarm.