Dash Integration Module (Dim)

Using scan tool, select DIM MAIN MENU, select SPECIAL FUNCTIONS, then select DIM MODULE SET-UP. Follow scan tool display prompts to complete setup. Select NEW DIM MODULE SETUP (to continue) or EXIT (to go back to Special Functions menu). After selecting New DIM Module Setup, scan tool will ask if you want to set up a Body Control Module. Select YES to setup module or NO to exit setup and return to Special Functions menu. After selecting YES, scan tool will display SETTING UP NEW BODY CONTROL MODULE. Once complete, scan tool will display SETTING UP NEW DASH INTEGRATION MODULE IS DONE. Select DONE or EXIT to return to Special Functions menu.