LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2000 >> Catera >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System With Traction Control System >> Symptom Tests >> Test B: Abs Indicator Inoperative >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Test B: Abs Indicator Inoperative: Notes

  1. Perform DIAGNOSTIC SYSTEM CHECK  under DIAGNOSIS & TESTING. After performing diagnostic system check, go to next step.
  2. Turn ignition off. Disconnect 31-pin EBTCM connector C1. Install Breakout Box (J-39700) and Adapter (J-39700-280) to EBTCM harness connector C1. Connect a fused jumper wire between breakout box terminals No. 21 and 19. Turn ignition switch on, with engine off. If ABS indicator illuminates, go to next step. If ABS indicator does not illuminate, go to step  4 .
  3. Replace EBTCM. See ELECTRONIC BRAKE TRACTION CONTROL MODULE (EBTCM)  under REMOVAL & INSTALLATION. After repairs, perform DIAGNOSTIC SYSTEM CHECK  under DIAGNOSIS & TESTING.
  4. Turn ignition off. Disconnect 26-pin instrument cluster connector. Using DVOM, measure resistance between breakout box terminal No. 21 and instrument cluster connector terminal No. 1 (Brown/Yellow wire). If resistance is not 0-5 ohms, go to next step. If resistance is 0-5 ohms, go to step  6 .
  5. Repair open or high resistance in Brown/Yellow wire between instrument cluster and EBTCM. After repairs, perform DIAGNOSTIC SYSTEM CHECK  under DIAGNOSIS & TESTING.
  6. Diagnose instrument cluster. See appropriate INSTRUMENT PANELS article in ACCESSORIES & EQUIPMENT. After repairs, perform DIAGNOSTIC SYSTEM CHECK  under DIAGNOSIS & TESTING.
scientia non olet · About LEMON Manuals