LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2000 >> Seville SLS >> Repair and Diagnosis >> Body & Frame >> Body, Cab Control Systems >> Body Control Modules >> Diagnostic Tests >> DTC B1000: Ecu Malfunction >> Testing
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC B1000: Ecu Malfunction: Testing

  1. If body control system diagnostic system check has been performed, go to next step. If body control system diagnostic system check has not been performed, go to BODY CONTROL SYSTEM DIAGNOSTIC SYSTEM CHECK  under SELF-DIAGNOSTIC SYSTEM.
  2. Connect scan tool to Data Link Connector. See Figure . Turn ignition on. Retrieve DTCs. If DTC B1000 is set as current, go to next step. If DTC B1000 is not set as current, check for intermittent connections at module that set DTC.
  3. Replace module that set DTC. After repairs, go to next step.
  4. Use scan tool to clear DTCs. Recheck system operation for module that set DTC. Recheck for DTC. If DTC B1000 resets, go to step  2 . If DTC does not reset, repair is complete.
scientia non olet · About LEMON Manuals