Transmitter Programming
NOTE:
Transmitters are numbered on back for reference only (can be programmed in any order).
Programming order is important, first transmitter programmed should be No. 1 and second should be No. 2. Up to 4 transmitters can be programmed. Additional transmitters are available, but will be unmarked. To program transmitters, perform following procedures:
- Connect scan tool.
- Select DIAGNOSTICS.
- Select BODY CODE.
- Select BODY STYLE CODE.
- Select OTHER.
- Select RFA.
- Select SPECIAL FUNCTIONS.
- Select F0 (PROGRAM KEY FOBS).
- Choose FOB number that you wish to program.
- Follow screen prompts to complete programming procedure.
- Press and hold LOCK and UNLOCK buttons on RKE transmitter being programmed, door locks should cycle within 15 seconds.
- Continue with next transmitter and repeat until all transmitters are programmed.
- Exit RKE transmitter programming procedure and disconnect scan tool.
- Cycle ignition and verify RKE transmitter operation.