Removal & Installation
TRANS ID - 4T80E
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| DOES NOT include wheel alignment - check. | 9.0 | C | ||
| Combination Procedure: CONVERTER: Drain & Test: | ||||
| 0.2 | C | |||
| Combination Procedure: CONVERTER BUSHING & SEAL: Remove & Replace: | ||||
| 0.3 | B | |||
| Combination Procedure: FLYWHEEL: Remove & Replace: | ||||
| 0.2 | C | |||
| Combination Procedure: INPUT SPEED SENSOR: Remove & Replace: | ||||
| 1.2 | B | |||
| Combination Procedure: TORQUE CONVERTER: Remove & Replace: | ||||
| 0.1 | C | |||
| Combination Procedure: TRANSAXLE ASSEMBLY: Replace: | ||||
| 1.0 | C | |||