Removal & Installation: Notes
WARNING:
Vehicles are equipped with air bag supplemental restraint system. Before attempting any repairs involving steering column, instrument panel or related components, see SERVICE PRECAUTIONS and DISABLING & ACTIVATING AIR BAG SYSTEM in appropriate AIR BAG RESTRAINT SYSTEMS article.
CAUTION:
When battery is disconnected, vehicle computer and memory systems may lose memory data. Driveability problems may exist until computer systems have completed a relearn cycle. See COMPUTER RELEARN PROCEDURES article in GENERAL INFORMATION before disconnecting battery.
CAUTION:
Electronic modules are sensitive to static electrical charges. Proper grounding of technician and workplace is essential to prevent damage.
CAUTION:
Vehicle is equipped with express up, torque sensitive front door windows, momentary actuation of power window switch can cause window to move directly to fully open or fully closed position. When working inside door, leave ignition switch in OFF position whenever possible.
NOTE:
Vehicle is equipped with express up, torque sensitive front door windows. When battery or power has been removed from either front door module, programming procedure will need to be performed, once power has been restored. See WINDOW MOTOR - EXPRESS MODE
under PROGRAMMING.
NOTE:
Use correct fastener in correct location. Replacement fasteners must be correct part number for application. Fasteners requiring replacement or fasteners requiring use of thread locking compound or sealant are identified in service procedures. DO NOT use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage fastener. Use correct tightening sequence and specifications when installing fasteners in order to avoid damage to part and systems.