Piston Ring Set: Remove & Replace

Includes: Remove carbon and Cylinder ridge, burnish Cylinders and replace Rod Bearings. Adjust Valves (where applicable). DOES NOT include Pin fit and/or align.

Applies To	Note	Standard Hours	Warranty Hours	Skill Level
All Cylinders		16.8	12.4	A
Additional Procedure: PISTON RING SET: Remove & Replace:
w/Skid Plate add		0.3		A
Where Air Pump interferes add		0.2		A
Combination Procedure: MAIN BEARINGS: Remove & Replace:
All		2.1		A
Combination Procedure: PISTON OR ROD PIN: Remove & Replace: DOES NOT include Pin fit and/or align.
Each		0.3		A
Combination Procedure: ROCKER ARM STUD: Remove & Replace:
Each Additional		0.2		B
One		0.3		B
Combination Procedure: VALVE: Grind Complete:
		3.5		A
Combination Procedure: VALVE LIFTERS: Remove & Replace:
All		0.5		B
Combination Procedure: VALVE LIFTERS (REMOVED): Clean:
Each Additional		0.1		B
One		0.2		B