LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2002 >> Escalade EXT >> Repair and Diagnosis >> Steering >> Power Steering System >> Repair Instructions >> Power Steering Pump Flow Control Valve Actuator Replacement - On Vehicle >> Disassembly Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Disassembly Procedure

  1. Remove the electrical connector from the variable assist steering actuator (1).
  2. Remove pump assembly from the vehicle, if the variable assist steering actuator (1) is not accessible. Refer to Power Steering Pump Replacement (4.8 L, 5.3 L and 6.0 L Engines)  or Power Steering Pump Replacement (8.1 L)  .
  3. Remove the retaining ring (2) from the variable assist steering actuator (1).

    Important:  Note the orientation of the variable assist steering actuator discharge fitting.

  4. Remove the variable assist steering actuator (1).
  5. Remove the O-ring seal from the variable assist steering actuator.
    Fig 1: Removing Variable Assist Steering Actuator
    G01662156Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals