Removal Procedure

Important:  Before replacement of the DIM module (1), record the personalization settings in order to transfer the settings after the DIM module (1) has been replaced.

1. Remove the right sound insulator. Refer to CLOSEOUT/INSULATOR PANEL REPLACEMENT - RIGHT or CLOSEOUT/INSULATOR PANEL REPLACEMENT - RIGHT .
2. Disconnect the DIM electrical connectors (2).
   Fig 1: Disconnecting DIM Electrical Connectors (LHD)

   Courtesy of GENERAL MOTORS CORP.
3. Depress inward on the locking tab (2).
4. With the locking tab (2) depressed, slide the DIM (1) downward.
5. Remove the module (1) from the bracket.
   Fig 2: Removing Module & Locking Tab (LHD)

   Courtesy of GENERAL MOTORS CORP.