Programmable Modes
- Mode 1: ON
- Mode 2: OFF, Mode 2 is set as the default mode from the factory.
To determine the mode to which the vehicle is programmed or to program the vehicle to a different mode, use one of the following procedures:
- Mode 1: ON
- Mode 2: OFF, mode 2 is set as the default mode from the factory.
To determine the mode to which the vehicle is programmed or to program the vehicle to a different mode, use one of the following procedures:
- Mode 1: ON
- Mode 2: OFF, mode 2 is set as the default mode from the factory.
To determine the mode to which the vehicle is programmed or to program the vehicle to a different mode, use one of the following procedures:
- Mode 1: 0:00 seconds
- Mode 2: 0:15 seconds
- Mode 3: 0:30 seconds
- Mode 4: 1:00 minute
- Mode 5: 1:30 minutes
- Mode 6: 2:00 minutes
- Mode 7: 2:30 minutes
- Mode 8: 3:00 minutes
Before the vehicle was shipped from the factory, it was programmed with this feature turned off. This may have been changed since the vehicle left the factory, to determine the mode to which the vehicle is programmed or to program the vehicle to a different mode, do the following:
- Enter the Personalization menu following the instructions listed previously.
- Scroll to TWILIGHT DELAY to highlight it.
- Press the scroll/select knob to turn Twilight Delay on or off. If the feature is turned off, the exterior lamps will not illuminate at all when you exit the vehicle. Once the feature is turned on, the modes listed above will appear on the display, and the currently selected time delay will have an X in the box to the left.
- Turn the scroll/select knob until you reach the desired time delay
- Press the scroll/select knob once to select your choice. When a time is selected, an X will appear in the box to the left of the time delay you chose. Only one mode can be selected at a time.
The mode you selected is now set. You can either exit the programming mode or program the next feature available on the vehicle.
- Mode 1: ON
- Mode 2: OFF, Mode 2 is set as the default mode from the factory.
To determine the mode to which the vehicle is programmed or to program the vehicle to a different mode, do the following:
- Enter the Personalization menu.
- Scroll to AUTO EXIT SEAT to highlight it.
- Press the scroll/select knob to switch back and forth between on and off. When the AUTO EXIT SEAT is turned on, an X will appear in the box to the left.
The mode you selected is now set. You can either exit the programming mode or program the next feature available on the vehicle.
- Mode 1: ON
- Mode 2: OFF
Before the vehicle was shipped from the factory, it was programmed to mode 1. The mode to which the vehicle was programmed may have been changed since it left the factory. To determine the mode to which the vehicle is programmed or to program the vehicle to a different mode, use one of the following procedures.
- Mode 1: ON
- Mode 2: OFF
Before the vehicle was shipped from the factory, it was programmed to mode 1. The mode to which the vehicle was programmed may have been changed since it left the factory. To determine the mode to which the vehicle is programmed or to program the vehicle to a different mode, use one of the following procedures.
- Mode 1: ON
- Mode 2: OFF
Before the vehicle was shipped from the factory it was programmed to mode 2. The mode to which the vehicle was programmed may have been changed since it left the factory. To determine the mode to which the vehicle was programmed or to program the vehicle to a different mode, use one of the following procedures:
The mode you selected is now set. You can either exit the programming mode or program the next feature available.