LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2003 >> Escalade EXT >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Body Control System >> Repair Instructions >> Body Control Module Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

  1. Slide the BCM onto the bracket.
  2. Connect all the connectors (1) except the brown connector.
  3. Connect the brown connector.
    Fig 1: Sliding BCM Onto Bracket And Connecting Connectors
    G01458008Courtesy of GENERAL MOTORS CORP.
  4. Install the knee bolster. Refer to KNEE BOLSTER REPLACEMENT in Instrument Panel, Gages, and Console.
  5. Connect the negative battery cable(s).
  6. Reprogram the BCM. Refer to BODY CONTROL MODULE (BCM) PROGRAMMING/RPO CONFIGURATION  .
  7. Perform the Passlock Learn Procedure. Refer to PROGRAMMING THEFT DETERRENT SYSTEM COMPONENTS in Theft Deterrent
    Fig 2: Installing Knee Bolster
    G01458009Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals