Installation Procedure
WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
- Place in position, the new sunroof side opening closeout panel cover (6) to the sunroof module track assembly (3).
- Hold the lower part (5) of the side opening closeout panel cover firmly and press the locking tab (4) into the track assembly.
- Ensure the entire length of the side opening closeout panel cover (6) is secure to the sunroof assembly track.
- Close the sunroof window (1).
- Open the sunroof window to the vent position.
- Secure the sunroof side opening closeout panel cover (6) to the 3 clips (2) located on the inside edge of the sunroof window.
- Close the sunroof window.
- Cycle the sunroof window to the vent position and full open positions in order to ensure the sunroof side opening closeout panel covers are secure to the attachment clips.
- Close the sunroof window.
- Close the sunshade.