Conditions For Running DTC

DTCs P0102, P0103, P0106, P0107, P0108, P0121, P0122, P0123, P0401, P0404, P0405, P0440, P0442, P0446, P1404 or P1441 are not set.
The engine is running.
The ignition 1 signal is 11-18 volts.
The MAP sensor is less than 59 kPa.
The change in the MAP sensor is less than 4 kPa.
The Throttle Position (TP) sensor angle is less than 48 percent.
The change in the TP sensor angle is less than 3 percent.
The Exhaust Gas Recirculation (EGR) position sensor is less than 90 percent.
The Evaporative Emission (EVAP) canister purge valve command is less than 90 percent.
The traction control is inactive (if equipped).
The conditions are met for 10 seconds.