Conditions For Running DTC

DTCs P0101, P0102, P0103, P0106, P0107, P0108, P0112, P0113, P0117, P0118, P0121, P0122, P0123, P0125, P0201, P0202, P0203, P0204, P0205, P0206, P0207, P0208, P0335, P0336, P0340, P0341, P0385, P0386, P0401, P0403, P0404, P0405, P0440, P0442, P0443, P0446, P0449, P1106, P1107, P1111, P1112, P1114, P1115, P1121, P1122, P1336, P1372, P1404, and P1441 are not set.
The Engine Coolant Temperature (ECT) sensor is more than -40°F (-40°C).
The Intake Air Temperature (IAT) sensor is more than -1°F (-18°C).
The Ignition 1 Voltage parameter is 10.5-18.0 volts.
The Barometric (BARO) pressure sensor is more than 65 kPa.
The Engine Run Time parameter is more than 40 seconds.
The transmission gear state has not changed for 3 seconds.
The Torque Converter Clutch (TCC) state has not changed in 3 seconds.
The Throttle Position (TP) sensor angle is less than 1.5 percent.
The spark advance is less than 12.39 degrees.
The Knock Retard parameter is more than -13.79 degrees.
The Vehicle Speed Sensor (VSS) is less than 1.9 MPH.
The above conditions are met for more than 3 seconds.