Torque Specifications
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) | |
|---|---|---|
| Case Cooler Connector (Return) | 21 (29) | |
| Case Cover-To-Case Bolt | ||
| 10 mm | 20 (27) | |
| 13 mm | 23 (31) | |
| Case Cover-To-Case Stud | ||
| 10 mm | 20 (27) | |
| 13 mm | 23 (31) | |
| Case Cover-To-Driven Sprocket Support Bolt | 20 (27) | |
| Case Extension-To-Case Bolt | ||
| 10 mm | 20 (27) | |
| 13 mm | 41 (55) | |
| Case Extension-To-Case Stud | 41 (55) | |
| Case-To-Forward Clutch Support Stud | 20 (27) | |
| Cooler Connector-To-Cooler (Case Cover) | 20 (27) | |
| Differential-To-Final Drive Carrier Bolt | 56 (76) | |
| Manual Shaft-To-Detent Lever Nut | 25 (34) | |
| Oil Test Case Cover Plug (No. 40 TORX(R)) | 19 (26) | |
| Side Cover-To-Case Cover Bolt | ||
| 13 mm | 20 (27) | |
| 15 mm | 41 (55) | |
| Side Cover-To-Case Cover Stud | 41 (55) | |
| Transaxle Mount-To-Bracket Nut (Left) | 55 (75) | |
| Transaxle Mount-To-Bracket Nut (Rear) | 30 (40) | |
| Transaxle Mount Bracket-To-Transaxle Bolt (Left) | 37 (50) | |
| Transaxle Mount Bracket-To-Transaxle Bolt (Rear) | 37 (50) | |
| Transaxle Mount-To-Frame Bolt and Nut (Rear) | 37 (50) | |
| Transaxle Mount-To-Frame Rail Nut (Left) | 52 (70) | |
| INCH Lbs. (N.m) | ||
| Accumulator Housing Cover Bolt | 124 (14) | |
| Accumulator Housing-To-Channel Plate Bolt | 124 (14) | |
| Bottom Pan-To-Case Bolt | 106 (12) | |
| Channel Plate-To-Accumulator Housing Bolt | 124 (14) | |
| Channel Plate-To-Case Bolt | 124 (14) | |
| Channel Plate-To-Case Nut | 124 (14) | |
| Detent Lever & Roller Assembly Bolt | 124 (14) | |
| Drive Sprocket Support-To-Case Bolt | 115 (13) | |
| Input Speed Sensor-To-Case Bolt | 115 (13) | |
| LCVB-To-Channel Plate Bolt | 124 (14) | |
| Oil Drain-Bottom Pan-To-Case Cover Plug | 124 (14) | |
| Oil Transfer Plate-To-Case Bolt | 124 (14) | |
| Pressure Control Solenoid Bracket-To-UCVB Bolt | 115 (13) | |
| Pump Assembly-To-Case Bolt | 115 (13) | |
| Pump Assembly-To-Case Cover Bolt | 115 (13) | |
| Scavenge Pump Cover-To-Scavenge Pump Body Bolt | 115 (13) | |
| Scavenge Tube-To-Case Bolt | 124 (14) | |
| Secondary Pump-To-Case Bolt | 115 (13) | |
| Secondary Pump-To-Case Cover Bolt | 115 (13) | |
| Servo Cover-To-Case Bolt | 124 (14) | |
| Spacer Plate Support-To-Channel Plate Bolt | 124 (14) | |
| Speed Sensor-To-Case Extension Bolt | 124 (14) | |
| Temperature Sensor | 30 (3.4) | |
| UCVB-To-Case Bolt | 115 (13) | |
| UCVB-To-Case Cover Bolt | 115 (13) | |
| UCVB-To-Driven Sprocket Support Bolt | 115 (13) | |