LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2004 >> CTS Base, 3.6 7 >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - 3.6L - Introduction >> Repair Instructions >> Mass Air Flow (MAF)/Intake Air Temperature (IAT) Sensor Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: Installing New MAF Sensor Seal And MAF Sensor
    GM1201263Courtesy of GENERAL MOTORS CORP.
  1. Install the new MAF sensor seal and the MAF sensor.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the MAF sensor screws.

    Tighten:  Tighten the MAF sensor screws to 4 N.m (35 lb in).

  3. Install the air cleaner intake duct. Refer to Air Cleaner Intake Duct Replacement .
  4. Install the MAF electrical connector.
scientia non olet · About LEMON Manuals