LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2004 >> DeVille Protection Series >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls (Introduction) - 4.6L >> Repair Instructions >> Exhaust Gas Recirculation (EGR) Valve Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: View Of EGR Valve & Heat Shield
    GM602307Courtesy of GENERAL MOTORS CORP.
  1. Install the new gasket.
  2. Install the EGR valve.
    3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the EGR valve retaining nuts/bolts.

    Tighten:  Tighten the retaining nuts/bolts to 24 N.m (18 lb ft).

  4. Install the heat shield and nuts.

    Tighten:  Tighten the retaining nuts to 9 N.m (80 lb in).

  5. Reconnect the EGR valve electrical connector.
scientia non olet · About LEMON Manuals