LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2004 >> DeVille Protection Series >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls (Introduction) - 4.6L >> Repair Instructions >> Manifold Absolute Pressure (MAP) Sensor Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: View Of MAP, IAC, ECT, TP Sensors
    GM602335Courtesy of GENERAL MOTORS CORP.
  1. Install the MAP (1) sensor into the intake manifold.
  2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the accelerator control cable bracket and bolts.

    Tighten:  Tighten the bracket bolts to 12 N.m (106 lb in).

  4. Connect the MAP sensor electrical connector.