LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2004 >> Escalade EXT >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Body Control System >> Repair Instructions >> Body Control Module Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

  1. Slide the BCM onto the bracket.
  2. Connect all the connectors (1) except the brown connector.
  3. Connect the brown connector.
    4. Fig 1: Connecting Body Control Module Connectors
    GM387553Courtesy of GENERAL MOTORS CORP.
  4. Install the knee bolster. Refer to Knee Bolster Replacement in Instrument Panel, Gages, and Console.
    5. Fig 2: Installing Knee Bolster
    GM348714Courtesy of GENERAL MOTORS CORP.
  5. Connect the negative battery cable(s).
  6. Reprogram the BCM. Refer to Body Control Module (BCM) Programming/RPO Configuration .
  7. Perform the Passlock Learn Procedure. Refer to Programming Theft Deterrent System Components in Theft Deterrent
scientia non olet · About LEMON Manuals