Installation Procedure
- Install a stationary window into the opening. Refer to Urethane Adhesive Installation of Stationary Windows .
- Install the window side reveal moldings to the vehicle.
- Install the screws to the left and the right sides of the window side reveal moldings.
Tighten: Tighten the screws to 2 N.m (18 lb in).
- Install the front door sealing weatherstrips (1) to the retainer (2).
- Install the cowl air inlet grille panel. Refer to Air Inlet Grille Panel Replacement in Body Front End.
- Install the window wiper arms. Refer to Wiper Arm Replacement in Wipers/Washer Systems.
- Install the antenna mast, if equipped. Refer to Fixed Antenna Replacement in Entertainment.
- Install the rearview mirror. Refer to Rearview Mirror Replacement .
- Close the hood.
- Remove the double layer of masking tape around the perimeter of the painted surfaces and the interior trim.
NOTE:
Refer to Fastener Notice
in Cautions and Notices.