Installation Procedure
- Install the battery insulator, if necessary.
- Install the battery.NOTE: Refer to Fastener Notice in Cautions and Notices.
- Install the battery hold down retainer and bolt.
Tighten: Tighten the bolt to 25 N.m (18 lb ft).
- Install the front end diagonal brace and bolts.
Tighten: Tighten the bolts to 9 N.m (80 lb in).
- Connect the positive battery cable.
Tighten: Tighten the bolt to 17 N.m (13 lb ft).
- Snap the positive battery cable cap closed.
- Connect the negative battery cable. Refer to Battery Negative Cable Disconnect/Connect Procedure .