Removal Procedure
Courtesy of GENERAL MOTORS CORP.
- Loosen the air duct clamp at the throttle body.
- Remove the duct from the throttle body.
- Remove the powertrain control module (PCM) cover (3).
- Disconnect the mass air flow/intake air temperature (MAF/IAT) sensor connector.
- Remove the air intake resonator and duct. Refer to Air Cleaner Intake Duct Replacement
- Remove the PCM.
- Remove the upper filler panel. Refer to Filler Panel Replacement - Upper
in Body and Accessories.
- Remove the 3 screws securing the air cleaner assembly to the vehicle and remove the assembly.