LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2005 >> DeVille Base >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Introduction >> Repair Instructions >> Air Cleaner Intake Duct Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: View Of PCM & MAF/IAT Sensor
    GM622423Courtesy of GENERAL MOTORS CORP.
  1. Combine the air cleaner intake duct and mass air flow/intake air temperature (MAF/IAT) sensor.
  2. Install the air cleaner intake and MAF/IAT assembly on the throttle body and air cleaner cover.
  3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  4. Inspect for proper alignment of the air cleaner intake and MAF/IAT assembly and tighten the hose clamps.

    Tighten:  Tighten the air cleaner intake and MAF/IAT assembly clamps to 3 N.m (27 lb. in.).

  5. Connect the MAF/IAT sensor electrical connector.