LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2005 >> DeVille Base >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Introduction >> Repair Instructions >> Fuel Tank Replacement >> Assemble Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Assemble Procedure

    Fig 1: Identifying Fuel Filler Neck
    GM104599Courtesy of GENERAL MOTORS CORP.
  1. Install the fuel filler hose to the fuel tank (3). Align the dot on the hose to the parting line on the fuel tank.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the fuel filler hose clamp (2).

    Tighten:  Tighten the clamp to 4.2 N.m (37 lb. in.).

    3. Fig 2: Identifying Fuel Tank And Components
    GM681724Courtesy of GENERAL MOTORS CORP.
  3. Install the fuel sender assembly. Refer to Fuel Sender Assembly Replacement .
  4. Install the fuel pipes (2, 3) and the EVAP pipe (1).
scientia non olet · About LEMON Manuals