April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

Fig 1: Ignition Control Module

GM602331

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices.

IMPORTANT: Be sure the ignition cassette grounding spring and insulator are in place when installing the ignition cassette.

Install the ignition control module.
Install the ignition control module retaining screws.

Tighten: Tighten the ignition control module retaining screws to 0.8 N.m (7 lb. in.).

Connect the spark plug boots to the spark plugs.
Install the ignition cassette. Refer to Ignition Coil(s) Replacement - Bank 2 .