LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2005 >> DeVille Base >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Introduction >> Repair Instructions >> Manifold Absolute Pressure (MAP) Sensor Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: MAP, IAC, ECT, TP Sensors Component View
    GM602335Courtesy of GENERAL MOTORS CORP.
  1. Install the MAP (1) sensor into the intake manifold.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the accelerator control cable bracket and bolts.

    Tighten:  Tighten the bracket bolts to 12 N.m (106 lb. in.).

  3. Connect the MAP sensor electrical connector.
scientia non olet · About LEMON Manuals