LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2005 >> Escalade EXT >> Repair and Diagnosis >> Body & Frame >> Windows >> Stationary Window System >> Repair Instructions >> Quarter Window Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

    CAUTION: Refer to Glass and Sheet Metal Handling Caution in Cautions and Notices.
    CAUTION: Refer to Cracked Window Caution in Cautions and Notices.
    IMPORTANT: Before cutting out a stationary window, apply a double layer of masking tape around the perimeter of the painted surfaces and the interior trim.
  1. Open the liftgate.
    2. CAUTION: If broken glass falls into the defroster outlets, it can be blown into the passenger compartment and cause personal injury.
  2. Cover the following parts to protect from broken glass.
    1. The upper dash pad
    2. The defroster outlets and A/C outlets
    3. The seats and the carpeting
  3. Remove the right of left side applique.
    4. Fig 1: Separating Urethane Adhesive From Window
    GM315335Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Keep the cutting edge of the tool against the quarter window from inside the vehicle. This will allow the urethane adhesive to be separated from the window.
  4. Use J 24402-A  , J 39032  , or equivalent in order to remove the quarter window. See Special Tools .
    • Leave a base of urethane on the pinchweld flange.
    • The only suitable lubrication is clear water.
  5. If the original reveal molding on the window is damaged, replace the molding.
    6. Fig 2: View Of Quarter Window
    GM264809Courtesy of GENERAL MOTORS CORP.
  6. With the aid of an assistant, use the suction cups to remove the window from the opening.
scientia non olet · About LEMON Manuals