LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2005 >> Escalade EXT >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - 4.8L, 5.3L & 6.0L - Introduction >> Repair Instructions >> Knock Sensor (KS) Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: View Of Knock Sensors
    GM309864Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  1. Install the knock sensors.

    Tighten:  Tighten the sensor to 20 N.m (15 lb ft).

    2. Fig 2: View Of Rubber Covers
    GM832149Courtesy of GENERAL MOTORS CORP.
  2. Connect the knock sensor electrical connectors.
  3. Push down on the rubber covers.
  4. Install the intake manifold. Refer to Intake Manifold Replacement in Engine Mechanical-4.8L, 5.3L, and 6.0L.
scientia non olet · About LEMON Manuals