LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2005 >> XLR >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Introduction >> Repair Instructions >> Ignition Coil(s) Replacement - Bank 1 >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: View Of Ignition Coils
    GM1283865Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Ensure that the spark plug seal is in place when installing the ignition coil.
  1. Install the ignition coil.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the ignition coil retaining bolt.

    Tighten:  Tighten the ignition coil retaining bolt to 10 N.m (89 lb in).

  3. Connect the ignition coil electrical connector.
  4. Install the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement in Engine Mechanical - 4.6L (LH2).
scientia non olet · About LEMON Manuals