LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2005 >> XLR >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Introduction >> Repair Instructions >> Ignition Module Replacement - Right >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: View Of Ignition Coils
    GM928257Courtesy of GENERAL MOTORS CORP.
  1. Carefully install the ignition coil assembly.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the ignition coil assembly retaining bolts.

    Tighten:  Tighten the ignition coil assembly retaining bolts to 10 N.m (89 lb in).

    3. Fig 2: View Of Engine Wiring Harness & Right Ignition Coil Harness
    GM927822Courtesy of GENERAL MOTORS CORP.
  3. Reconnect the ignition coil assembly electrical connector.
    4. Fig 3: View Of Fuel Injector Sight Shield/Top Cover
    GM1272602Courtesy of GENERAL MOTORS CORP.
  4. Install the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement in Engine Mechanical - 4.6L (LH2).
scientia non olet · About LEMON Manuals