LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2006 >> Escalade EXT >> Repair and Diagnosis >> Accessories & Equipment >> Collision/Avoidance >> Object Detection System >> Repair Instructions >> Object Alarm Module Switch Replacement - Rear >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

  1. Remove the dash trim bezel. Refer to Bezel Replacement - Instrument Panel (I/P) Cluster in Instrument Panel, Gages and Console.
  2. Grasp the buttons assembly (2) housing and pull outwards.
    3. Fig 1: Removing Rear Object Alarm Module Switch
    GM741402Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the electrical connector from the rear object alarm module switch.
  4. Remove the switch (1) from the housing (2).
scientia non olet · About LEMON Manuals