Installation Procedure
- Install the wheel speed sensor ring using the J 45860 (1) and the J 8092 (2). See Special Tools .
- Drive the wheel speed sensor ring into the axle housing until the tool bottoms against the tube.
- Install the axle shaft bearing using the J 23690 (1) and the J 8092 (2). See Special Tools .
- Drive the axle shaft bearing into the axle housing until the tool bottoms against the tube.
- Install the axle shaft seal using the J 21128 . See Special Tools .
- Drive the tool into the bore until the axle shaft seal bottoms flush with the tube.
- Install the axle shaft. Refer to Rear Axle Shaft Replacement (8.6 W/O JL4, 9.5, 9.5LD Inch Axles) or Rear Axle Shaft Replacement (8.6 Inch Axle W/JL4) in Rear Drive Axle.
- Install the rear axle housing cover. Refer to Rear Axle Housing Cover and Gasket Replacement in Rear Drive Axle.
- Install the rear wheel speed sensor. Refer to Wheel Speed Sensor Replacement - Rear .
- Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
- Fill the rear axle. Refer to Lubricant Replacement - Rear Drive Axle (8.6 Inch Axle) or Lubricant Replacement - Rear Drive Axle (9.5 LD Axle) or Lubricant Replacement - Rear Drive Axle (9.5 Inch HD and 10.5 Inch Axles) in Rear Drive Axle.
- Lower the vehicle.