LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2006 >> Escalade EXT >> Repair and Diagnosis >> External Pages >> Different car >> Section 1719 (Programming And Setup - All Systems) >> Repair Instructions >> Power Steering Control Module Programming and Setup >> Power Steering Control Module (PSCM) Replacement and Setup
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Power Steering Control Module (PSCM) Replacement and Setup

WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

The following service procedures require either a programming or a setup event performed for a complete repair.

If the power steering control module (PSCM) is replaced, the following procedures must be performed in the following order:

  1. PSCM reprogramming-Refer to Service Programming System (SPS) .
  2. Steering Position/Torque Sensor Calibration