Removal & Installation
WARNING: This page is about the CTS Base, 2.8 T, Automatic, which is a different variant/trim than selected.
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| V6 | Includes: R&I Exhaust System. Includes: Lowering Subframe. | 6.6 | C | |
| Combination Procedure: CLUTCH PILOT BEARING: Remove & Replace: | ||||
| V6 | 0.9 | C | ||
| Combination Procedure: CLUTCH PRESSURE PLATE: Remove & Replace: | ||||
| V6 | 0.6 | C | ||
| Combination Procedure: CLUTCH RELEASE BEARING: Remove & Replace: | ||||
| V6, w/Actuator | 0.4 | C | ||
| Combination Procedure: FLYWHEEL: Remove & Replace: | ||||
| V6 | 0.9 | C | ||
| Combination Procedure: TRANSMISSION ASSEMBLY: Replace: | ||||
| 0.4 | C | |||