Seat Temperature Control Module: Service and Repair

Heated Seat Control Module Replacement - Front

Removal Procedure

Caution: Refer to SIR Caution.




1. Remove the front seat cushion.
2. Disconnect the electrical connector from the heated seat module.
3. Remove the heated seat module screws (2) and remove the module.

Installation Procedure





Notice: Refer to Fastener Notice.

1. Install the heated seat control module and install the retaining screws (2).

Tighten the screws to 2 N.m (18 lb in).

2. Connect the electrical connector.
3. Install the seat cushion.
4. Refer to Control Module References for programming and setup information. Programming and Relearning