Dash Integration Module (DIM) Programming and Setup

Dash Integration Module Programming and Setup

Dash Integration Module (DIM) Replacement

If the dash integration module (DIM) is replaced, the following procedures must be performed. Refer to Body Control Module (BCM) Programming/RPO Configuration (DIM) Body Control Module (BCM) Programming/RPO Configuration (RIM).

1. Program the vehicle identification number (VIN).
2. Learning the restraints ID
3. Setting options

Inflatable Restraint Sensing and Diagnostic Module (SDM) Replacement

If the sensing and diagnostic module (SDM) is replaced, perform the "Learning the restraints ID" procedure, for DIM. Refer to Body Control Module (BCM) Programming/RPO Configuration (DIM) Body Control Module (BCM) Programming/RPO Configuration (RIM) for "Learning the restraints ID" procedure.