Circuit/System Testing
- Verify that the transmitter is the correct transmitter for the vehicle.
- If not the correct transmitter, replace the transmitter.
- Verify the scan tool FOB Programmed parameter is Yes.
- If not Yes, program the transmitter.
- Place the transmitter on the test pad of the J 43241
and press each button of the transmitter one at a time. The tester should sound a tone and illuminate a green light when each button is pressed.
- If none of the buttons sounds the tone and illuminates the green light, replace the battery.
- If one or more of the buttons sounds the tone and illuminates the green light, replace the transmitter.
- Verify the scan tool FOB Function parameter responds to every function on the transmitter.
- If it does not respond to every function, replace the RCDLR module.
- Replace the transmitter.