LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2007 >> Escalade EXT >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Engine Ground Strap Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: View Of Engine Ground Strap & Bolt
    GM1702850Courtesy of GENERAL MOTORS CORP.
  1. Install the ground strap to the vehicle.
  2. Install the ground strap terminal to the stud.
    3. NOTE: Refer to Fastener Notice .
  3. Install the engine ground strap nut at the front plenum panel.

    Tighten:  Tighten the nut to 9 N.m (80 lb in).

  4. Position the ground strap to the rear of the left cylinder head.

    Tighten:  Tighten the bolt to 16 N.m (12 lb ft).

  5. Install the engine ground strap bolt to the rear of the left cylinder head.
  6. Install the upper intake manifold sight shield. Refer to Upper Intake Manifold Sight Shield Replacement .
scientia non olet · About LEMON Manuals