Memory Seat Control Module Replacement

WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Memory Seat Control Module

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Remove the front driver seat. Refer to Front Seat Replacement - Bucket .
1	Driver Seat Adjuster Outer Finish Cover Refer to Front Seat Cushion Outer Trim Panel Replacement (Power) or Front Seat Cushion Outer Trim Panel Replacement (Manual) .
2	Driver Seat Adjuster Inner Finish Cover Refer to Front Seat Cushion Inner Trim Panel Replacement .
3	Driver Seat Riser Finish Cover Procedure: Pull rearward to disengage the cover from the seat riser.
4	Driver Seat Cushion Cover and Pad Refer to Seat Cushion Trim Cover and Pad Replacement .
5	Memory Seat Module Nut (Qty: 4) CAUTION: Refer to Fastener Caution . Tighten: 9 N.m (80 lb in)
6	Memory Seat Module Procedure Disconnect the electrical connector. Refer to Control Module References for programming and set-up information.